-40%
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch
4' dry core bit with center guide for sds plus hammer drills hilti bosch

4' dry core bit with center guide for sds plus hammer drills hilti bosch

$ 77.08

Availability: 279 in stock
  • Restocking Fee: No
  • Type: Core Drill Bit
  • Brand: Pro Right Industry
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer

    Description

    4" LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH SDS PLUS ADAPTER AND CENTER GUIDE
    . THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM  TO HARD AGGREGATES & MEDIUM STEEL REINFORCING.
    THE
    12MM
    TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE  DESIGNED IN  AIDING WITH STEEL AGGREGATES IN CONCRETE...
    OUTER DIAMETER: 4''
    SEGMENT HEIGHT: 3/8"
    SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE
    MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING
    CORE TRAVEL: 10”
    THREAD SIZE:
    5/8"
    BOND TO CORE: INNER/OUTER DOUBLE LASER WELD
    INSTRUCTIONS FOR CENTER GUIDE USE:
    (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
    (2) THREAD ON TO DRILL
    (3) SCREW DRY CORE BIT OVER ADAPTER
    (4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
    (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE)
    (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE,
    DO NOT CORE WITH CENTER GUIDE IN BARREL.