-40%
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide
4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide

4'' Dry Diamond Core Drill bit with angle grinder adapter & center guide

$ 70.75

Availability: 190 in stock
  • Condition: New
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Drill Type: Dry Core Drill
  • All returns accepted: Returns Accepted
  • Type: Core Drill Bit
  • Item must be returned within: 30 Days
  • Brand: Pro Right Industry

    Description

    4
    ”  Dry Diamond Core Bit for Masonry, Stone and Concrete with re-enforcement.
    Order includes:  Dry core bit and Angle grinder adapter with center guide (pilot bit)
    Angle grinder not include
    Product Description:
    PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BIT
    . THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE
    12MM
    TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE  DESIGNED IN  AIDING WITH STEEL AGGREGATES IN CONCRETE...
    Condition:
    New
    Quality:
    Pro Grade
    Diameter:
    4''
    Segment Height:
    12mm (laser welded)
    Arbor Size:
    5/8” - 11 thread
    Drilling Depth:
    10"
    Drilling Method:
    Dry and Wet
    INSTRUCTIONS FOR CENTER GUIDE USE:
    (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
    (2) THREAD ON TO DRILL
    (3) SCREW DRY CORE BIT OVER ADAPTER
    (4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
    (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE)
    (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE,
    DO NOT CORE WITH CENTER GUIDE IN BARREL.