Exact 9450 Meter/Mix Dispensing Systems ideal for potting

Description

5x Model 9450 Single Acting, fixed ratio in-line Meter/Mix and Dispense Systems
Summary of Equipment and past use:
Original Cost of equipment 7,000
(5) Base Metering
Systems:
Fixed Ratio In-Line Metering Systems with Linked Diverter Valving presents thick and thin
materials at the same time, no sticky check valves or phasing adjustments required.
Incrematic dispense logic allows multiple small shots from large metering cylinder set. Total
Volume per Cylinder stroke is 1,805 cc's; 2,880 grams.
Material Type:
Dow Corning Sylgard 160 Silicone (Part A Grey and Part B Off-white
)
Matieral Mix Visc:
8775 cps
Overview Notes:
Anticipating 25
,000 parts in 22-1/2 hours. Flow characteristics, testing and product
performance verification will determine final production capacity.
Linear Encoder:
Digital Preset shot sizes with Linear Encoder to set shot size (4-preset selector
)
Material Cylinders:
SS Cylinders, 9450SA 316 Stainless housing & piston, teflon spring seal on 2 piece piston
Part A&B Toggle Feed
Tanks:
80
gallon capacity galvanized tanks with stainless liner, electric agitation and bottom feed to
bulk pump.
Part A&B Feed Tanks:
80
gallon capacity galvanized tanks with stainless steel liner with electric agitation & bottom feed to bulk pump.
Part A&B Vacuum Vent
Tank:
Vacuum/vent assembly on tank for degassing material (each Tank)
High/Low Level Sensors:
High and Low level sensors with alarms (top down)
Vacuum Pump:
(2) Portable Vacuum Pump, 115 VAC 1/2 HP, 2 stage, 3 CFM; 29" vac. Analog vacuum
gauge and adjustment valve
Drum Lift:
(2) Gallows Lift for part A&B transfer into 80 gallon tanks.
Part A&B
Replenishment Feed
System from Bulk:
Modified Drum lid with electric agitation for 55 gl drum: includes appropreate drum pump, regulator/lubricator, shut off valve, transfer hose and replenishment inlet on top of part A&B
tanks.
Auto Replenish:
Auto Refill Logic w/SS Actuator Valving (per ea)
Supply Pumps:
Appropriate Bulk Feed Stub Pump w/ Stand, regulator/lubrica or, shutoff valve and associated
fittings
Hoses:
High Pressure Hoses and Fittings
Recirc Hose Assembly:
Re-circulation
Hose Assembly for use on systems wi h filled materials; helps facilitate bleeding and filler dispersion
Dispense Head Mount:
Remote Head
Dispense Head:
410 Stainless
Auto-valve
with 410-M 60-A 1:1 ratio Manifold w/ stainless 388 n-line check
valves/ swivels, Viton seals.
Dispense Head Manifolds:
(5) S-452A Series Distribution Manifolds, 6 point, supplied for filling 30 parts at once +/- 10%.
Tubing A & B:
Stainless Steel Tubing (valves to cylinders)
System Stands:
Stationary MMD S-437 Stand
Documentation:
Full documentation, includes full operating and shutdown procedures
Crate-International:
Machines are crated for international shipment